- Nuovo
Web UI/DSP
The CI 8-120 is network ready for simple set up, via the custom WebUI. This allows fast set up, of inputs & outputs, setting gain, stereo/mono and bridging of channels, creation of DSP profiles using the 5 band Parametric EQ, plus high and low pass filters to allow the dialing in of the audio in each zone and optimize performance. A variety of power on methods are available as well as an Eco mode setting for minimal power consumption. I/O switching and routing can also be managed via compatible control systems with drivers available for Crestron, Control4, Elan, RTI and URC.
System suggestion
Combine the CI 8-120 DSP with the CI 580 V2 4- zone BluOS rack mount streamer or Bluesound NODE to create a complete hi res multi-room package of incredible value and quality. For a step- up in source performance, the NAD C 658 would also compliment the extra power of the CI 8-120 DSP perfectly.
Key Features
- 8 Channels x 120 Watts @ 8 Ohms, HybridDigital with Hypex UcD
- Bridgeable to 4 channels X 200 Watts @ 8 Ohms
- Effectively handles long cable runs and difficult speaker loads
- Ethernet port for IP control, custom web UI with virtual I/O panel and performance diagnostics
- DSP with 5 band parametric EQ, plus high and low pass filters
- 4 stereo RCA inputs
- Dual global Inputs/Outputs
- 2U Rack height
- 5W Standby Mode, 3W Network Standby
- 12V Trigger In; IR In/Out
- Thermostatic fan cooling with front vents
- Universal AC Power Supply
- Multiple Power-up options including Auto Sense turn on, as well as Eco Mode
- Control drivers for Crestron, Control4, Elan, RTI, URC.
LINE INPUT, SPEAKER OUT
- Continuous Output Power into 8 Ohms
- >120 W (all channels driven)
- >130 W (two channels driven)
- Continuous output power into 4 ohms
- >135 W (all channels driven)
- >230 W (two channels driven)
- Continuous output power into 8 ohms at Bridged mode
- >200 W (all channels driven)
- >320 W (two channels driven)
- THD (20 Hz – 20 kHz)
- <0.05 % (1 W to 100 W, 8 ohms and 4 ohms)
- Signal-to-Noise Ratio
- >88 dB (A-weighted, 500 mV input, ref. 1 W out in 8 ohms)
- Clipping power (all channels driven)
- >130 W (1 kHz 8 ohms 0.1 % THD)
- >150 W (1 kHz 4 ohms 0.1 % THD)
- Clipping power into 8 ohms at Bridged mode
- >300 W (1 kHz 0.1 % THD – all channels driven)
- >400 W (1 kHz 0.1 % THD – two channels driven)
- IHF dynamic power (all channels driven)
- 8 ohms: 125 W
- 4 ohms: 200 W
- 2 ohms: 180 W
- IHF dynamic power (two channels driven)
- 8 ohms: 145 W
- 4 ohms: 260 W
- 2 ohms: 300 W
- IHF dynamic power (Bridged mode, all channels driven)
- 8 ohms: 440 W
- 4 ohms: 350 W
- 2 ohms: 230 W
- IHF dynamic power (Bridged mode, two channels driven)
- 8 ohms: 480 W
- 4 ohms: 380 W
- 2 ohms: 300 W
- Peak output current
- >20 A (1 ohm, 1 ms)
- Damping Factor
- >110 (ref. 8 ohms, 20 Hz to 6.5 kHz)
- Frequency Response
- ±0.5 dB (20 Hz – 20 kHz)
- Channel separation
- >70 dB (1 kHz)
- >65 dB (10 kHz)
- Maximum undistorted input level
- 2900 mV
- Input sensitivity (for 120 W in 8 ohms, maximum volume)
- 1150 mV
- Analog Input audio sense threshold (one channel with signal)
- 3 ± 0.5 mVrms (ref. 100 Hz – 10 kHz)
- Trigger IN level
- 3 – 30 Vdc
- Standby power
- 0.5W
DIMENSION AND WEIGHT
- Dimensions (W x H x D)*
- 483 x 45 x 435 mm (19 1/16 x 1 13/16 x 17 3/16”)
- Shipping Weight
- 10 kg (22 lbs)